The robot is equipped with a Bluetooth feature, allowing it to connect to the app to complete mapping successfully without requiring a Wi-Fi connection. After mapping is complete, you can set a schedule, and the robot will follow it to mow autonomously, even without network connectivity.

Additionally, you can press the buttons on the control panel to start tasks. Also, the Link module is pre-installed in the robot, offering up to 3 years of free Link service, which allows the robot to stay connected to the app and be remotely controlled, even without Wi-Fi.

Yes, the robot comes with a pre-installed Link module that includes Link Service, free for up to 3 years once the robot is powered on. This allows the robot to stay connected to the app and be remotely controlled without a Wi-Fi connection.

a. If your front and back yards are not connected but there is a passageway the robot can travel through:

You can first create the boundary of the front yard, then tap "Work zone" in the app to remotely control the robot to go to the backyard to create the boundary. Next, tap "Path" to remotely control the robot to create a path connecting the front and back yards. Finally, generate a complete map.

b. If there is a physical barrier between the front and back yards that prevents the robot from moving between them:

The robot supports two individual maps. You can create separate maps for the front and back gardens, then switch between them as needed.

Yes, because the robot needs to start from the charging station for mapping, we recommend placing a separate charging station for each map. When switching between maps in the app, simply move the robot manually to the corresponding area.

Yes, you can install the charging station in any suitable location. If the charging station is outside the work area, you can tap "Path" during mapping to remotely control the robot to move from the work area to the area in front of the charging station, creating a connecting path. The robot will not activate the blade disc while moving along this path to avoid damaging the surface.

Expanding a Zone: Go to "Map Editing" and select "Set zone". If the new zone doesn’t overlap with an existing one, a path is required to connect them. If they do overlap, the new zone will automatically merge with the existing one.

Deleting a Zone: In "Map Editing", you can delete independent zones that have not been separated. To remove part of a zone, use the "Set no-go zone" function to draw the area you want to delete.

It is suitable for use in saltwater pools. We design our products with the presence of salt and chlorine in the water in mind. We use highly corrosion-resistant materials and processes to ensure the durability of our products.

Our products can be safely used in brines with concentrations up to 5,000 PPM and chlorine levels up to 4ppm. It is recommended to clean once after each cycle, other chemical levels to be checked: chlorine (if chlorine is used): Maximum 4ppm pH: 7.0-7.8PPM

It is recommended that after each cleaning task is completed, clean the garbage basket, check the front and right sensors for foreign bodies and clean them, and check whether there are foreign bodies in the rolling brush and slurry cover and clean them.